Drumless Tracks: Where to Find Them and How to Make One from Any Song

November 13, 2026
Try the Drum Remover on your own song.Free to try: 5 credits when you sign in with Google (a song up to 5 min), no card.Try it free
A drumless track is a song with the drums taken out. See where ready-made drumless songs come from, and how to make your own from any MP3 with a drum remover.
drumless
drumless track
drumless song
drum remover
drum play-along

A drumless track is a recording with the drum part taken out, so a drummer can play the missing part. Search for "drumless" and you will find two kinds. Some are made for play-along practice. Others are real songs with the drums removed.

You can buy the first kind or make the second kind from nearly any song you own. This page compares the two and shows how to make your own with our Drum Remover.

Two kinds of drumless song

A ready-made drumless track is usually a new recording, or an official mix supplied by the artist or publisher. It often has a click or count-in, because it was built for practice.

A drumless song you make yourself starts from the original record. An AI model estimates the drums and takes them out, and what stays is the original band. The sound is the real thing, with no click and the tempo exactly as the original drummer played it.

We read the guide on Elephant Drums on November 4, 2026. It names the Vic Firth play-along collection and the Hal Leonard Drum Play-Along books as places to find ready-made tracks, and it says that source-separation software suits a specific song better than a collection. It also says its author has not tested those tools.

Which one to pick

You wantBetter choice
A clean track with a count-in, made for practiceA ready-made play-along
The exact song you love, as recordedMake it yourself
A song nobody has published a drumless version ofMake it yourself
Notation to read while you playA play-along book
Drums only, to study what the drummer playedMake it yourself

Ready-made tracks cover a limited list of songs. If yours is not on it, the remover is the way in.

How to make a drumless track from a song

  1. Open the Drum Remover and sign in with Google. New accounts get 5 credits, no card.
  2. Upload an MP3, WAV, M4A or FLAC file.
  3. Press Remove the drums. The button shows the price first: 1 credit for each minute of song.
  4. Wait a few minutes. Most songs take 1 to 3 minutes.
  5. Two files appear, Without the drums and Drums only. Click either to hear it alone.
  6. Download them as MP3 files at 320 kbps. Both have the same length as the original, so they line up in a DAW or a player.

In an earlier test of this tool, a 3 minute 22 second song took 88 seconds. If a job fails, the credits come back.

Watch the tempo

A record made without a click can speed up and slow down a little, the way a live band does. Elephant Drums makes the same point about metronomes: a separate click can drift away from a recording whose tempo moves.

Your own drumless song has the original drummer's timing built in. Follow the bass and guitar, not a metronome. If you want a steady pulse, pick songs that were made with a click, which is common in pop and electronic music, and check the first minute against a metronome before you trust it.

What a drum remover leaves behind

Expect a good result with some leftovers. These are the cases we list on the Drum Remover page:

  • A snare with a long reverb tail can leave a faint wash.
  • Claps, shakers and synthetic hats are sometimes counted as drums and sometimes not.
  • Live recordings leak drums into every microphone, so some of the kit stays.
  • Dense mixes with loud cymbals can keep a trace of the drums.

Clean studio recordings with close-miked drums work best. Listen to the Without the drums file on headphones before you build a practice session on it.

We have not run a listening comparison between the Without the drums file and a published play-along track, and we have not measured cymbal bleed across genres. If you try one on a song you know well, trust your ears over this page.

Need only the kick or the hi-hat?

The Drum Remover treats the kit as one part. The Drum Kit Splitter breaks it into kick, snare, toms, hi-hat, ride and crash. That is useful when you want to learn one pattern before you play the full groove. If you want the whole song in parts, start from the stem splitter.

For a practice routine that goes with the drumless file, see our guide on how to remove drums from a song.

Cost

The Drum Remover costs 1 credit per minute of song. Credit packs start at $2.99 for 30 credits; on the $7.49 pack of 100, a 4-minute song costs about $0.30. Credits never expire.

Practice at home with any song is fine. A drum cover posted online with the original band audio may need permission from the rights holder.

FAQ

What is a drumless track?

A song with the drums removed, so you can play the drum part yourself. It can be a play-along recording or a real song processed with a drum remover.

What is a drumless song?

The same thing. People use "drumless song" for a track you can play drums over, and the file is usually a stereo MP3 or WAV.

How do I make a drumless track from my own song?

Upload it to the Drum Remover, press Remove the drums, and download Without the drums.

Can I get the drums on their own?

Yes. The tool also gives you Drums only, which is handy for hearing what the original drummer played.

Will the drums be completely gone?

No tool can promise that. Reverb, live recordings and busy mixes can leave a trace.

What format is the drumless file?

An MP3 at 320 kbps. WAV is not offered.