How to Convert Audio to MIDI in Ableton Live (Free Option)

November 18, 2026
Try the Audio to MIDI Converter on your own song.Free, right in your browser. Nothing to install.Open it, free
Convert audio to MIDI in Ableton Live with Convert Harmony, Melody or Drums, or make the .mid file free in your browser and drag it into Live.
ableton
audio to midi
midi
daw
drums

Ableton Live can turn audio into MIDI with three built-in commands: Convert Harmony, Convert Melody and Convert Drums to New MIDI Track. If you do not own that edition of Live, or you want a second opinion on the notes, the free Audio to MIDI converter makes a .mid file in your browser that you can drag into any Live set.

Below are both routes, plus how to get a cleaner result from a full song.

The three Convert commands in Live

According to Ableton's Live 12 manual, the commands are in the Create menu and in the right-click menu of an audio clip. Each one writes the result to a new MIDI track.

CommandMeant forWhat you get
Convert Harmony to New MIDI TrackSeveral notes at once (chords, piano, guitar)A MIDI clip on a new track with a piano sound
Convert Melody to New MIDI TrackOne note at a time (a sung line, a solo instrument)A MIDI clip on a new track with a synth sound
Convert Drums to New MIDI TrackUnpitched, percussive audioA MIDI clip on a new track with a Drum Rack, with kick, snare and hi-hat sounds assigned where Live can tell them apart

The manual does not say which editions of Live include these commands, so check yours before planning around them.

Get the audio ready first

Live's manual gives a few tips that apply to all three commands. Use material with clear attacks, because notes that fade in slowly may not be found. Use one instrument at a time. Use uncompressed files such as WAV or AIFF, since an MP3 can give unpredictable results unless the bitrate is high. And adjust the transient markers before you convert, because Live uses them to decide where notes start.

For drums, the manual points to unaccompanied drum breaks. Other instruments in the clip get detected too, so a full mix gives you a mess of extra notes.

How to convert audio to MIDI in Ableton, step by step

  1. Drop the audio clip onto an audio track.
  2. Check the warp and transient markers. Move or delete any that sit in the wrong place.
  3. Right-click the clip, or open the Create menu.
  4. Pick Convert Harmony, Convert Melody or Convert Drums to New MIDI Track, depending on the audio.
  5. Play the new track. Swap the instrument or drum kit if you like.
  6. Fix stray notes in the MIDI clip editor.

Running the "wrong" command is allowed. The manual notes that Convert Harmony on a vocal line often produces notes that were not in the original audio, which can be a creative trick.

Route two: make the MIDI in your browser

This helps when you have a clip Live handles badly, when you do not have the right edition, or when you just want a quick comparison.

  1. Open Audio to MIDI. It is free, needs no account and does not upload your audio, because it runs in your browser.
  2. Drop in a file, or press Record and play or sing.
  3. Pick the source type: Vocals / humming, Piano / keys, Guitar, Bass or Full song. Vocals and Bass read one note at a time. Piano and Guitar keep chords. Bass looks only at low notes, about 30 to 420 Hz.
  4. Convert, then check the notes against the audio.
  5. Turn on Snap to beat if you want the notes on the grid. The tempo is measured and written into the .mid file.
  6. Download the .mid and drag it into your Live set. It lands on a MIDI track, and you choose the instrument.

The same page also has WAV to MIDI and MP3 to MIDI versions, handy if you search by file type.

Full songs and drum loops: split first

Both methods work best on one instrument. For a finished song, split it first with the stem splitter. It separates Vocals, Drums, Bass, Guitar, Piano and Other, and costs 1 credit per minute. New accounts get 5 free credits with Google sign-in, which covers one song up to 5 minutes. A 4-minute song costs 4 credits.

Download the part you want and convert it. For a drum groove, the Drum Remover page gives you the drums on their own. For a melody, the Acapella Extractor gives you the vocals. Splitting is not perfect, and dense or reverb-heavy mixes leave traces, so expect some cleanup in the MIDI clip.

Only convert music you own, have a license for, or are studying for private practice.

If you work in Logic too, the Logic Pro version of this guide covers Flex Pitch. For drums specifically, see how to convert drums to MIDI.

FAQ

Can Ableton convert audio to MIDI?

Yes. Live has Convert Harmony, Convert Melody and Convert Drums to New MIDI Track in the Create menu and the clip's right-click menu. Check your edition, since the manual does not list which ones include them.

How do I convert drums to MIDI in Ableton?

Use Convert Drums to New MIDI Track on a clean drum loop. Live puts the rhythm on a Drum Rack and tries to tell kick, snare and hi-hat apart. A drum break with no other instruments works best.

Is there a free audio to MIDI converter for Ableton?

The Audio to MIDI page is free and runs in your browser. Download the .mid file and drag it into Live.

Why are there so many extra notes in my MIDI clip?

The audio probably has more than one instrument, or the transient markers are off. Split the part you need first, and fix the markers before converting.

Should I use an MP3 or a WAV?

Use WAV or AIFF if you have it. Ableton's manual warns that MP3 files can give unpredictable results unless the bitrate is high.

Sources

Pages read on November 10, 2026. Menus can change between versions.