To convert drums to MIDI, split the drum part into single drums first, then turn each drum's hits into MIDI notes in your DAW. Our Drum Kit Splitter does the first step. It gives you kick, snare, toms, hi-hat, ride and crash on separate rows, so each MIDI note lands on the right drum.
One honest note: our free audio to MIDI converter is made for pitched instruments, not drums. This guide explains why, and shows the method that works.
Pitch detectors look for notes: a steady pitch that lasts a while. Drums don't work that way. A snare is a burst of noise. A cymbal is a wash of high frequencies with no clear pitch.
Run a drum loop through a normal audio-to-MIDI tool and you get random notes all over the keyboard. That is why our audio to MIDI converter is for voice, piano, guitar and bass.
Drum MIDI needs something else: find when each drum hits, and which drum it is. Splitting the kit answers the second question.
- Open the Drum Kit Splitter and sign in with Google. New accounts get 5 free credits, enough for one song up to 5 minutes.
- Upload an MP3, WAV, M4A or FLAC file.
- Press Split the song. The price is on the button first: 1 credit per minute.
- Eight rows appear: Drums (full), Kick, Snare, Toms, Hi-hat, Ride, Crash and Residual.
- Download the rows you need as MP3s at 320 kbps.
If you only need the whole kit as one file, the Drum Remover gives Drums only. In our test it took 88 seconds for a 3 minute 22 second song.
Now each drum is its own file. Put each one on its own audio track in your DAW, lined up at the start.
Many DAWs have a feature that detects hits in a drum recording and creates MIDI notes from them. Others offer drum replacement, which triggers a new sample on each hit. Look in your DAW's audio menu or manual for terms like "convert drums to MIDI," "slice to MIDI" or "drum replacement."
Work one drum at a time:
- Convert the Kick file. Check that every kick hit became one MIDI note.
- Move those notes to your drum instrument's kick key.
- Repeat for Snare, Hi-hat and the rest.
Because each file holds one drum, the detector doesn't confuse a kick with a snare.
Automatic detection is never perfect. Expect to:
- Delete doubles, where one hit made two notes.
- Add missing ghost notes, the very quiet snare hits.
- Fix velocities, so accents stand out.
- Quantize gently, if you want it tighter. Keep some feel if it was played live.
For a short loop, programming the MIDI by hand can be faster:
- Loop one bar of the Kick file and place kick notes where you hear them.
- Do the same with Snare and Hi-hat.
- Play your MIDI against the original drums to check.
Hearing each drum alone makes this much easier than working from the full song. For building your own grooves from there, see how to make a beat.
- Kick and snare usually come out clean and strong.
- Hi-hat is clear on most pop and rock.
- Ride and crash can blend on busy parts.
- Toms are clear on fills, quiet the rest of the time.
The Residual row holds what didn't fit elsewhere, such as percussion. Live recordings have more bleed between drums.
Turning a drum part into MIDI to learn or study is fine. A MIDI copy of a groove is not the original recording, but using a distinctive part in a release may still need permission. If in doubt, write your own variation.
- Start with a good copy of the song. Clear cymbals need a high-quality source.
- Use the studio version. Live drums bleed into every microphone.
- Trim to the groove you need. You pay per minute of audio.
No. Our converter is for pitched instruments. Split the drums with the Drum Kit Splitter, then convert each drum to MIDI hits in your DAW.
Each file then holds one drum, so every MIDI note goes to the right drum and the detector makes fewer mistakes.
Kick, snare, toms, hi-hat, ride and crash, plus the full kit and a residual row.
MP3 at 320 kbps.
1 credit per minute of song. New accounts get 5 free credits with Google sign-in.