How to Remix a Song With AI Stems (No Stems From the Label)

November 21, 2026
Try the Stem Splitter on your own song.Free to try: 5 credits when you sign in with Google (a song up to 5 min), no card.Try it free
How to remix a song when you only have the finished file: split it into stems with AI, keep the vocal, build new drums and bass, and know the rules.
remix
stems
vocals
drums
bass

To remix a song, get the parts of the original as separate tracks, keep the ones you want (usually the vocal), and build a new arrangement around them. Without stems from the artist, you can make your own: the stem splitter on our home page turns a finished file into Vocals, Drums, Bass, Guitar, Piano and Other. From there, the work is yours.

This guide covers the AI route. If you only want a short slice to loop, read how to sample a song instead. A remix reworks the whole track.

Step 1: Pick the song and check its tempo and key

Choose a song with a vocal you love and a mix that is not too dense. Dry pop, R&B and rap vocals separate best. Old live recordings with everyone in one room are harder.

Then find the tempo and key. Upload the file to the BPM finder and the key finder. Both are free, need no account, and run in your browser without uploading your audio. You will set your project to that tempo and stay in that key, or choose a new one on purpose.

Step 2: Split the song into stems

Open the stem splitter and load your song. Playing it in the player is free and does not need sign-in. Sign-in comes only when you press split.

New accounts get 5 free credits. The home page splitter costs 1 credit for every minute of audio, shown on the button before it runs. A 4-minute song is 4 credits, about $0.40 at the 30-credit pack. Upload an MP3, WAV, M4A or FLAC, or a video, with no length limit.

You get six reels: Vocals, Drums, Bass, Guitar, Piano and Other. Each has a speaker switch, so you can mute a part and hear the rest. Download the ones you want as 320 kbps MP3 or lossless WAV. Your files stay in your account for 30 days.

When six parts are not enough

Some remixes need more detail, for example a string line or a synth you want to keep alone. The 7-stem splitter HQ gives more parts for 6 credits per minute, so a 4-minute song costs 24 credits. That is about $2.39 at the 30-credit pack. If you only need the drums or the bass out of the way, the drum remover is cheaper at 1 credit per minute.

Step 3: Decide what you keep

Most remixes keep the vocal and replace most of what is under it. Some also keep one hook, such as a guitar riff or a piano line, because it makes the remix recognizable.

  • Keep Vocals, and drop Drums and Bass for new ones.
  • Keep Vocals and Piano for a slower, stripped version.
  • Keep Drums and Bass and replace the vocal to flip the mood.

Stay away from the Other reel until you have listened to it. It is a mix of everything the model did not place in the other five.

Step 4: Build the new track

Open a new project in your editor and set the tempo you picked. Drop in the vocal.

  1. Time-stretch the vocal if you changed the tempo. Keep changes modest, since big stretches make a voice sound watery.
  2. Program new drums. A four-on-the-floor kick turns a ballad into a club track. A half-time beat does the opposite.
  3. Write a new bass line that follows the chords of the original key.
  4. Add chords or a pad, then fill in with your own sounds.
  5. Leave space. A good remix often has more silence in it than the original.

Your editor does not matter much here. FL Studio, Ableton Live, BandLab and GarageBand all let you import audio, stretch it and add instruments. If you want the notes of the vocal as MIDI to play with a synth, the audio to MIDI converter works on a vocal alone.

Step 5: Clean up the vocal

A separated vocal can carry a little reverb or a quiet cymbal tick from the old mix. Listen with headphones, mostly at the ends of phrases. Cut out short noises, use a gate or a small volume dip between lines, and add your own reverb on top so the voice sits in the new track.

Our post on mixing vocals goes through levels and EQ.

Releasing a remix

A remix is a derivative of someone else's song and recording. Official remixes usually start when the artist or label sends the stems and agrees to the release. A bootleg you make from your own splits is fine to make for yourself and to learn from. Publishing it, or putting it on streaming services, normally needs permission from the rights holders, and platforms can take it down. Ask the label or look for an official remix contest if you want to release one.

Ready to try? Load a song in the stem splitter and see which parts you would keep.

FAQ

How do I remix a song with AI?

Split the song into stems with an AI splitter, keep the parts you want, then build new drums, bass and chords around them in your editor. The splitter here does the first part in your browser.

How do I remix a song in FL Studio, Ableton or BandLab?

After splitting, import the stems as audio. Set the project tempo, stretch the vocal to match, and add your own instruments. The editor's manual shows where the stretch and pitch controls are.

How much does it cost?

The home page splitter is 1 credit per minute. New accounts get 5 free credits. The 7-stem HQ splitter is 6 credits per minute. Failed splits give the credits back.

No. You upload a file from your device. Use music you own or have the right to use.

Do I need permission to remix a song?

To make one for yourself, usually no. To publish it, normally yes. Ask the rights holders, or use an official remix contest.