To learn a song by ear, work in layers: find the key, then the bass line, then the melody, then the chords, and loop every hard bar until it sticks. A stem splitter makes this easier, because you can turn off everything except the part you are trying to hear, and slow the song down without changing its pitch.
This works for guitar, piano, bass or voice. The method is the same, only the instrument changes.
Choose one verse or one chorus, not the whole song. Listen to it three or four times without your instrument. Hum the melody. If you cannot hum it, you will not find it on the instrument yet.
Learning a song by ear is a pile of small guesses and checks, so a short section keeps each guess easy.
Knowing the key narrows your guesses to about seven notes. Try the song's last note, which often is the home note, or use the free Key Finder, which needs no account. The post on how to find the key of a song shows the by-ear method as well.
If you cannot tell what a note is, what note is this helps you name it.
The bass tells you the chord roots. It is usually the easiest part to hear, because it is low and plays one note at a time.
Splitting makes it much clearer. Open the stem splitter, load your song and press split. It gives you Vocals, Drums, Bass, Guitar, Piano and Other. Each part has a speaker switch, so you can play the bass alone or hear everything but the bass. The Bass Remover page does the same for one part.
Loading and playing a song in the player is free and needs no sign-in. Sign in with Google when you press split. It costs 1 credit per minute, new accounts get 5 free credits, and a 4-minute song costs 4 credits.
In the player, the Practice section has Slower and Faster buttons. They change speed in 5% steps from 50% to 150%, and the pitch stays the same, so you can learn at 70% without the song going flat.
For a hard bar, press Set start (A) at the beginning, then Set end (B) at the end. The section repeats until you stop it. Work at 60 to 70%, then raise the speed one step at a time.
Play the melody on its own first. Use the splitter to turn off everything else, or Acapella Extractor if it is a vocal melody. Match it note by note, using the key to narrow your choices.
Then find the chords. Play each bass note and listen for whether the chord above it sounds major or minor. If you get stuck, play the bass note and the melody note together and ask whether it sounds like it belongs.
When you think you have it, check yourself. Drop the isolated part into the free Audio to MIDI page, pick the matching source type, and look at the notes on the piano. If your version differs, play both and listen for where they split.
This is a check, not a shortcut. The converter can make mistakes, especially on chords and fast runs, so trust your ear when they disagree.
- Warm up with the song's key on your instrument.
- Loop the hardest two bars at 70%.
- Add the parts back one at a time with the speaker switches, so you hear how yours fits.
- Turn off your instrument's part and play along with the rest.
- Play the whole section at full speed with all parts on.
Splitting is not perfect, and dense or live recordings leave traces in the other parts, so your ear stays in charge.
It depends on the song and your experience. A first song can take days. Later ones go faster, because you start to recognize common chord patterns and bass moves.
Find the key, then the bass notes, then the chords above them. Slow the song down and loop each change. The stem splitter can isolate the guitar so you can hear it without the band.
Start with the left-hand bass notes, then the chords, then the melody. Turn off everything but the piano part in the splitter and loop one bar at a time.
Yes. In the player, Slower and Faster change the speed from 50% to 150% in 5% steps, and the pitch stays the same.
Loading and playing a song in the player is free and needs no sign-in. Splitting takes 1 credit per minute, with 5 free credits for new accounts. The Key Finder and Audio to MIDI are free.