To isolate drums from a song, upload it to an AI drum splitter and download the drum file on its own. For the whole kit as one track, use the Drum Remover and keep the Drums only file. For each drum on its own, use the Drum Kit Splitter, which gives kick, snare, toms, hi-hat, ride and crash as separate rows.
Here is when to use each, and what to do with isolated drums.
Ask what you need the drums for.
- To hear the groove clearly, one drum track is enough.
- To sample a break, the full kit keeps the feel of the original.
- To learn a busy part, single pieces help. You can hear just the kick or just the hi-hat.
- To rebuild the beat, single pieces let you replace or layer one drum at a time.
- Open the Drum Remover and sign in with Google. New accounts get 5 free credits.
- Upload an MP3, WAV, M4A or FLAC file.
- Press Remove the drums. The price is on the button first: 1 credit per minute.
- Wait a minute or two. Two reels appear: Without the drums and Drums only.
- Download Drums only as an MP3 at 320 kbps.
In our test, a 3 minute 22 second song took 88 seconds.
- Open the Drum Kit Splitter and sign in.
- Upload your song.
- Press Split the song. It costs 1 credit per minute, shown on the button.
- Eight rows appear:
- Drums (full): the whole kit.
- Kick: the bass drum.
- Snare: usually the crack on beats two and four.
- Toms: fills and rolls.
- Hi-hat: the ticking pattern.
- Ride: the steady cymbal pulse.
- Crash: the big accent cymbal.
- Residual: whatever was left over.
- Switch rows on and off. Download the ones you need.
Learning a groove. Solo the kick to hear the foot pattern. Solo the hi-hat to count eighths or sixteenths. Then put them back together.
Making beats. Hear how a producer placed each hit. Our guide on how to make a beat shows how to build your own from there.
Sampling. Classic hip-hop is built on drum breaks. Our guide on how to sample a song covers chopping and the rules around permission.
Drum to MIDI. Clean single-drum files are the best starting point if you want to turn a drum part into MIDI in your DAW.
Kick and snare usually come out strong and clear. Cymbals are harder:
- They share the high range with vocals and guitar, so a little of those may come with them.
- Ride and crash can blend into each other on a busy part.
- Room echo can make the drums sound a bit roomy on their own.
Live recordings leak drums into every microphone, so expect more bleed there. Clean studio tracks give the best results.
If you also want the bass, guitar and vocals, use the stem splitter. It gives six parts in one go: vocals, drums, bass, guitar, piano and the rest. You can split the drums row again into pieces from there.
Isolating drums to learn or study is fine. Using someone else's drum recording in a release is sampling, and that needs permission from the owners.
Both tools cost 1 credit per minute of song. After the 5 free credits, credit packs start at $2.99 for 30 credits. Credits never expire. Failed jobs are refunded.
Every drum file starts at the same moment as the original song. Drag the Kick, Snare and Hi-hat files to the very start of the timeline, one per track. They play perfectly in sync with each other and with the full song.
From there you can:
- Balance them yourself. Turn the kick up to study the low end, or the hi-hat down to hear the snare.
- Add your own samples under the original hits, a common way to modernize an old beat.
- Set the project tempo to match the song, so the grid lines up with the hits.
- Start with a good file. A WAV or 320 kbps MP3 gives clearer cymbals than a low-quality rip.
- Pick studio versions. Live recordings have drums in every mic.
- Trim first if you only need a break. You pay per minute of audio, so a short section costs less.
Upload the song to the Drum Remover and download the Drums only file. For single drums, use the Drum Kit Splitter.
Yes. The Drum Kit Splitter gives the kick, snare, toms, hi-hat, ride and crash on separate rows.
Cymbals share frequencies with vocals and guitars. Some bleed is normal, especially on busy or live recordings.
MP3 at 320 kbps.
New accounts get 5 free credits with Google sign-in, enough for 5 minutes of audio.