A riser stem is the rising sweep before a drop, saved as its own audio file. If a track came without stems, you can pull the riser out with our Riser Extractor. You get two files: Risers and Without the risers.
Producers use this to study how a build-up is made, or to get a version of the track with the build-up cleaned out.
A riser is a sound that climbs to build tension. It might be white noise sweeping up, a synth rising in pitch, or a reversed cymbal swelling. It usually sits in the last bars before a drop, then stops just as the drop hits.
Risers are part of the sound design in EDM, trailers and pop. They tell the listener "something big is coming."
- Study the build. Hear what the riser is made of: noise, a synth, or both, and how long it lasts.
- DJ edits. Make a version of the track without the build-up sweep, or with your own riser.
- Sound design practice. Try to copy the riser on your own synth and compare.
- Mashups. Borrow the energy of a build-up under another song, for personal use.
- Open the Riser Extractor and sign in with Google. New accounts get 5 free credits, enough for 5 minutes of audio.
- Upload an MP3, WAV, M4A or FLAC file.
- Press Extract the risers. The price shows on the button first: 1 credit per minute of audio.
- Wait a minute or two. Two reels appear: Risers and Without the risers.
- Click a reel to hear it alone.
- Download each as an MP3 at 320 kbps.
The processing runs in the cloud, so there is nothing to install.
Risers are broad sounds. They fill much of the frequency range, so they overlap with cymbals, pads and vocals. That makes them harder to separate than a bass or a voice.
Best results come from:
- Electronic and cinematic tracks with a clear build-up.
- Builds where other parts thin out, so the riser stands alone.
Harder cases:
- Subtle risers in a dense mix. Part of the riser may stay in the other file.
- Cymbal swells. These can be split between the riser and the drums.
Always compare both files before you use them.
A build usually has three layers. Each has a tool:
- The riser itself, from the Riser Extractor.
- The drum roll, often a snare getting faster. Use the Drum Kit Splitter to hear the snare on its own row.
- The music, such as chords and a lead synth. Use the stem splitter to separate the main parts.
Listening to each layer alone shows how much of the tension comes from each. Often the riser does less than you think, and the snare roll does more.
Once you know what a riser is made of, you can build one:
- Start with white noise or a bright synth sound.
- Open a filter slowly over 4 to 16 bars.
- Raise the pitch or the volume at the same time.
- Add a little reverb that grows toward the end.
- Cut it sharply right on the drop.
If synths are new to you, start with what is a synthesizer. For the bigger picture, see how to make electronic music.
Extracting a riser to study it is fine. Using it in a release means using part of someone else's recording, so you need permission. Making your own riser avoids that question.
The Riser Extractor costs 1 credit per minute of audio. After the 5 free credits, packs start at $2.99 for 30 credits. Credits never expire. Failed jobs are refunded.
The Risers file starts at the same moment as the original track. Put it at the very start of a DAW timeline with the full song, and it lines up exactly. That makes it easy to see where the riser begins, how many bars it lasts and where it stops.
It is the rising build-up sound of a track, such as a noise sweep or climbing synth, saved as its own audio file.
Upload the track to the Riser Extractor, press Extract the risers, and download the Risers file.
Clear build-ups in electronic and cinematic music separate well. Subtle risers in busy mixes may leave some sound in the other file.
Two MP3s at 320 kbps: Risers and Without the risers.
1 credit per minute of audio. New accounts get 5 free credits with Google sign-in.